》》Sedona Sealer Protectant

　　Sedona Sealer Protectant is a non-toxic, non-hazardous, non-flammable process used for superior concrete protection. This process is a proprietary blend of reactive silicates plus surface-active agents, which penetrates into the concrete and reacts with the free calcium and lime to form an insoluble by-product that closes the porosity, increases the mass, strengthens, hardens and seals the concrete, makes it much more durable and resistant to damage by chemicals and mechanical abrasion. There are no special handling requirements under environmental regulations and contains ZERO% VOC content.

      Sedona Sealer Protectant improves the impermeability, wear resistance, weathering resistance, hardness, and other performance indicators of concrete. This product is widely used on the industrial floor, electronics, medicine workshop, supermarket, parking lot, food production base, stadium, museum, etc. and to increase the useful life of all concrete infrastructures.

》》Product function

　　The Sedona Sealer penetrates into the concrete forming a solid by-product in the gel pores, decreasing the porosity and increasing the mass of the concrete thereby increasing the surface hardness and strength. The process stops solids and liquids from penetrating into the concrete but does allow air molecules to flow freely through the concrete and thus allowing the concrete to "breathe".

The hardening and dustproof effect of Sedona Sealer is evident after several hours of using. The sealing process lasts for 1-12 months after application. Surface gloss and impermeability will be greatly improved.

》》WHAT Sedona SealerCAN DO:

　　 1)Reduce the porosity of existing concrete & effectively seal out contaminants.

         2)Increase the surface hardness and Abrasion Resistance of new and deteriorated concrete.

         3)Increase Compression Strength of new and deteriorated concrete.

         4)Reduce Chloride Penetration.

         5)Inhibit chemical attack of treated concrete.

         6)Form a solid by-product in the micro cracks and gel pores.

         7)Retard scaling of high strength properly finished concrete

         8)Increase the Mass & Density of concrete

         9)Produce a sheen on dense steel troweled non-air entrained concrete floors over time.